产品搜索
在线客服
 工作时间
周一至周五 :8:30-17:30
周六至周日 :9:00-17:00
联系方式

联系人:冀柏宏

电 话:

(+86)0314-2266829

手  机:

(+86)18831479808  

(+86)13191633902  

微信:18831479808

邮 箱:btsdyb@163.com

地 址:河北省承德技术产业开发区上板城镇卸甲营村


website qrcode

扫描查看手机版网站

产品详情
XJ简支梁悬臂梁组合冲击试验机
分享到:
XJ简支梁悬臂梁组合冲击试验机 
产品详情

XJ微机简支梁、悬臂梁组合冲击试验机

                       

产品介绍

 用于测定工程塑料、玻璃钢、陶瓷、铸石、塑料电器、绝缘材料、塑料管材等非金属材料的抗冲击强度。是化工行业、科研单位、大专院校、质量检测部门、生产厂家实验室等单位的试验设备

特点:

1品牌电脑显示,自动计算保存打印。

2 数显式采用圆光栅测角技术,具有精度高、稳定性好和测量范围大等特点,数字化测量  显示冲断功、冲击强度、预仰角、 升角、计算一批试样的平均值,能量损失自动修正。

3微机控制式还能自动分析处理试验数据、存储、打印试验报告。

符合标准:

符合标准:

GB/T3808-2002 摆锤式冲击试验机的检验

GB/T 1043-2008《硬质塑料简支梁冲击试验方法》;

GB/T 1843-2008《塑料悬臂梁冲击试验方法》;

ISO 179:2010《Plastics-Determination of Charpy impact properties》;

ISO 180:2000《Plastics-Determination of Izod impact strength》;

GB/T 18743-2002《流体输送用热塑性塑料管材简支梁冲击试验方法》(即适用于管材冲击)

GB/T 21189-2007  塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验

同时符合GB/T2611 ASTM D256-06、GB/T2611以及JB/T8761等标准的要求。

技术参数:

简支梁:

    1、冲击速度:2.9m/s,3.8m/s ;

2、摆锤能量:1J、2J、4J、5J、7.5J、15J、25J、50J

     3、摆锤中心至试样中心距离:221mm、380mm

     4、摆锤扬角:160°

     5、钳口支承间距:40mm、60mm、70mm、95mm

     6、支承刀刃圆角半径:R=1mm

     7、冲击刀刃夹角:30°

     8、冲击刀刃圆角半径:R=2mm

     9、试样类型尺寸,支承间距(单位mm)

试样类型

长度

宽度

厚度

支承间距

1

80±2

10±0.5

4±0.2

60

2

  50±1

6±0.2

4±0.2

40

3

120±2

15±0.5

10±0.5

70

4

125±2

13±0.5

13±0.5

95

悬臂梁冲击:

     1、冲击速度:3.5m/s ;

     2、摆锤能量:1J、2.75J、5.5J、11J、22J;

     3、摆锤扬角:160°;

     4、摆锤中心至冲击刀刃距离:322mm

    5、冲击刀刃至钳口上平面距离:22mm

     6、刀刃圆角半径:R=0.8mm

7、试样类型

试样类型

长度

宽度

厚度

1

80.0

10.0

4.0

2

63.5

12.7

12.7

3

63.5

12.7

6.4

4

63.5

12.7

3.2


microcomputer simply supported beam and cantilever beam impact testing machine
A product introduction
Combination of simply supported beam and cantilever beam impact testing machine is used to measure engineering plastics, glass fiber reinforced plastic, ceramic, cast stone, plastic electric appliances, insulation materials, plastic pipe material such as the impact strength of nonmetal materials.Is the chemical industry, scientific research units, colleges and universities, quality inspection departments, manufacturers of laboratory and other units testing equipment
Two simply supported beam and cantilever beam impact testing machine features:
1 has a pointer type, digital display, microcomputer control type three kind of model selection
2 digital display using circular grating Angle measuring technology, with high precision, good stability and large measurement range etc, digital measurement show that thrust power, impact strength, elevation, Angle, calculating the average of a batch of sample, the energy loss of automatic correction.
3 microcomputer control type can also automatically analysis the test data, store, print test reports.
Conform to the standard:
Meet ISO179, 180, GB/T1043, 1843, ASTM D256, JB8762, JB8761, ISO9854, GB18743 standard requirements, etc.
Four simply supported beam and cantilever beam impact testing machine technical parameters:
Beam:
1, impact speed: 2.9 m/s, 3.8 m/s.
2, the pendulum energy: 1, 2, 4, 5 j j j j.
7.5 J, 15, 25, 50 J J J
3, the pendulum center to the sample center distance: 221 mm and 380 mm
4, pendulum Angle: 160 °
5, jaw bearing spacing: 40 mm, 60 mm, 70 mm and 95 mm
6, support the blade radius: R = 1 mm
7, impact Angle of blade: 30 °
8, impact blade radius: R = 2 mm
9, the types of sample size, bearing spacing (mm)
1, impact speed: 3.5 m/s;
2, pendulum energy: 1, 2.75, 5.5 J J J, J, J,
3, pendulum Angle: 160 °;
4, impact pendulum center to edge distance: 322 mm
5, impact on the blade to jaw plane distance: 22 mm
6, the blade radius: R = 0.8 mm

display simply supported beam and cantilever beam impact testing machine
Combination of simply supported beam and cantilever beam impact testing machine is mainly used for determination of plastic, hard plastic, rubber, glass fiber, glass fiber, film, composite plastic pipe material, glass ceramics, tile, stone material, friction material, etc
Impact toughness test.
Simply supported beam with a,
Conform to the standard:
GB/T1043 hard plastic beam impact method
ISO 179 plastic, hard material is the determination of impact strength
ISO 9854 fluid conveying plastic pipe material, beam pendulum impact strength test
Main performance:
Impact energy: 5 J, 7.5 J, 15, 25, 50 J J J (choose a hammer)
Impact speed: 3.8 m/s
Pendulum early elevation: 160 °
Jaw offset: 40 mm, 60 mm, 70 mm and 95 mm
Jaw rounded corners: R1 = 1 mm
Dividing value: 0.5%
Sample type, size, support from the following table (GB/T 1043-93)
Sample type
The length of the C
The width of the b
The thickness of the d
Second, the cantilever beam
Conform to the standard:
GB/T 1843-96 plastic cantilever beam impact test method
ISO 180-1993 plastic cantilever beam with the determination of impact strength
GB/T 1043, GB/T 18743, ASTM D256, JB, JB 8762 8762
The ISO 9854 standard, etc
Of the machine
Testing machine for the pendulum, and by the pendulum, sample bearing indicating device, energy and the body of main components, such as instruction sample absorbed impact energy in the process of destruction.
Features:
The equipment for dial structure, the operation is simple, convenient, reliable performance impact test machine
Main performance:
Impact energy: 2.75, 5.5 J, J, J and J (choose a hammer)
Impact speed: 3.5 m/s
Pendulum early elevation: 150 °
Dividing value: 0.1%
Impact blade radius: R 0.8 + / - 0.2 mm
Method name, sample type, gap type and size as follows in table 2
Method names
Sample type
Gap type
Gap at the bottom of the radius of rN
The rest of the gap at the bottom of the width of bN
1843/1 GB u